Universal touch probe systems for extremely fast measurements under the harshest conditions in medium and large machining centres. Superior precision and speed due to modern, multi-directional measuring mechanism with optoelectronic switch signal generation.
TC50 | TC60 touch probes – Manufacture more productively with measuring speeds of up to 3 m/min
- Touch Probe TC50: Infrared transmission
- Touch Probe TC60: BRC radio technology
- DUO-Mode: Sequential use of 2 infrared measuring systems with one receiver
- Sequential use of up to 6 radio measuring systems with one receiver
- TWIN mode: Simultaneous use of 2 radio measuring systems on one machine
- Very long battery life
BLUM Workpiece Touch Probes
Touch probe systems by BLUM can be used for the most varied measurement and monitoring tasks in machine tools.
Fast determination of current workpiece position (workpiece zero point) prior to machining or after resetting using digital (switching) measurement.
Digital (switching) measurement of distances, single points, angles, inside and outside diameters, inside and outside widths on a manufactured workpiece.
The touch probes can be used for contour measurements using the FormControl measurement software.
Inspection of the manufactured workpieces for machining errors and adherence to manufacturing tolerance by means of control measurements prior to clamping.
Determination of parameters for adaptive machining and process control between and after the machining steps.
Reliable and fast measurements in the coolant thanks to modern measuring mechanism with increased measuring force.
Perfectly suitable for mass production under the harshest conditions thanks to robust design and protection class IP68.
Tool wear is compensated for by taking measurements on the workpiece and comparing these with the nominal dimension.
Compensation of the temperature-dependent thermal behaviour of machining centres.
Further product features
- Max. probing speed: 3 m/min
- Repeatability: 0.3 µm 2σ
- Protection class: IP68
- Approach directions: ±X, ±Y, -Z
Quickstart measuring cycles for BLUM workpiece touch probes are user-friendly subroutines of the machine control. They can be used for workpiece referencing as well as for measuring during the production process.
The following measuring cycle packages are available for the TC50 | TC60 touch probes:
- Quickstart Basic
- Quickstart T
- 3D Vector Probing
In BLUM we have found a partner that can offer us high-quality products and corresponding service. In addition, we have been extremely satisfied with the BLUM touch probes for years.